#Download mtty software serial
#Download mtty software software

Interrogating the Call Forwarding state of all classes (AT+CCWA=1,2,7) is working.

The Call Forwarding state of the required class should be returned by the Wireless CPU. Interrogating the Call Forwarding state on a specific class (voice (AT+CCWA=1,2,1 )or data (AT+CCWA=1,2,2) or fax (AT+CCWA=1,2,4)) returns +CME ERRRO: 30. This is only met if customer changes speeds between establishing and releasing the data call. Normally the unsolicited response has to be returned after.ДЄutobauding is not able to resynchronize with the Wireless CPU after a NO CARRIER response is received after releasing an active GSM data call. These indications should not be returnedДЄ command is sent and an unsolicited response (+CREG: 2) is returned before the OK response. When +WDIAGI indications are activated (AT+WDIAG command), some unsolicited responses are returned by the Wireless CPU during an MO data call between CONNECT and NO CARRIER responses. When the Open AT application use the AT+CUSD command to send USSD strings to the network, by using the GSM 7 bit default alphabet table (defined in GSM 23.38 specs), and when the USSD string contains some extended characters like, , ,В¦, ~ and ^, that are not defined into the GSM 7 bit alphabet table, the Wireless CPU replaces each extended characters by 0x20.

#Download mtty software software

Software Release Description 2.1 Software Identification This feature is now available in release stage.

#Download mtty software serial

Wireless CPU В® default serial port is UART1 and USB: UART1 and USB serial ports are activated by default for all Wireless CPU В® produced with Open AT В® Firmware 7.4. For more information, refer to AT+WDWL in AT commands Interface Guide. This feature is still available in beta stage. It also means that the M2M Studio is able to download over USB and all UARTs any binary in DWL format. For more information, refer to AT+WMBS in AT commands Interface Guide.ДЎK-Xmodem download through USB and UART2: The new bootloader is supporting the 1K-Xmodem protocol over USB and all UARTs to download a new binary in DWL format (either bootloader, Open AT В® Firmware or Open AT В® applications). This section lists the features added from the previous Open AT В® Firmware 7.4.ДЄuto quad-band: In auto quad-band mode, the Wireless CPU В® automatically chooses between the 900/1800 MHz bi-band or the 850/1900 MHz bi-band according to the radio environment.